Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> visual check list pcb apres flyng probe
visual check list pcb apres flyng probe
1. General Inspection
Verify PCB cleanliness (no dust, fingerprints, or contaminants)
Check for any visible physical damage (cracks, scratches, etc.)
Inspect for proper labeling and markings on the PCB
2. Component Verification
Ensure all components are present as per the BOM (Bill of Materials)
Check for correct orientation of polarized components (e.g., capacitors, diodes)
Inspect for proper solder placement on all components
3. Solder Joint Inspection
Evaluate solder joints for quality (no cold joints, bridging, or voids)
Confirm that through-hole components are properly soldered
Check for any excessive solder or solder balls on the board
4. Electrical Connections
Verify that all test pads are intact and free from damage
Inspect for any signs of shorts between traces or pads
Ensure that all connections meet design specifications
5. Final Review
Conduct a final visual inspection of the entire board
Document any discrepancies or issues found during inspection
Prepare the PCB for the next stage of processing or assembly
This checklist covers essential aspects of a visual inspection for PCBs after flying probe testing.
Download CSV
Download JSON
Download Markdown
Use in Manifestly
Use in Manifestly