Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> welding use GMAW
welding use GMAW
Pre-Welding Preparation
Inspect the work area for safety hazards and ensure proper ventilation.
Gather all necessary personal protective equipment (PPE), including gloves, helmet, and protective clothing.
Check and verify the welding machine settings according to the material being welded.
Ensure that all materials to be welded are clean and free from contaminants such as rust, oil, and dirt.
Equipment Setup
Assemble the GMAW welding machine and ensure all connections are secure.
Set the appropriate wire feed speed and voltage settings based on the material thickness and type.
Install the correct welding wire and ensure proper spool tension.
Connect the ground clamp securely to the workpiece or welding table.
Welding Technique
Position the welding torch at the correct angle (typically 15-20 degrees from vertical).
Maintain a consistent travel speed to ensure even weld penetration and bead appearance.
Use the appropriate welding technique (stringer beads or weave) based on the joint design and position.
Monitor the arc length and adjust as needed to maintain a stable arc.
Post-Welding Inspection
Allow the weld to cool before handling or further processing.
Inspect the weld for defects such as cracks, porosity, or undercut.
Clean the weld area to remove slag or spatter.
Document the welding parameters and any observations for quality control records.
Maintenance and Cleanup
Turn off the welding machine and disconnect power sources.
Clean and store welding equipment properly after use.
Dispose of any waste materials, including empty wire spools and spent consumables, according to local regulations.
Review the welding process and identify areas for improvement in future projects.
Download CSV
Download JSON
Download Markdown
Use in Manifestly
Use in Manifestly