write me a checklist for safety system for truck loading of Jet A1

Verify that all personnel involved in the loading process are trained and authorized.

Ensure that the loading area is clear of unnecessary personnel and obstacles.

Inspect the integrity of the truck and loading equipment for any visible damage or leaks.

Confirm that the correct type of product (Jet A1) is being loaded.

Check that the appropriate personal protective equipment (PPE) is available and being used by all personnel.

Ensure that all hoses and connections are in good condition and free from leaks.

Check that spill containment measures are in place and functional.

Verify that the loading arms or nozzles are compatible with the truck's inlet.

Confirm that emergency shut-off valves are operational and easily accessible.

Communicate clearly with all team members involved in the loading process.

Follow the established loading sequence and procedures as per company policy.

Monitor the loading process continuously for any signs of leaks or irregularities.

Ensure that the correct volume and flow rate of Jet A1 is being loaded as per specifications.

Review emergency response procedures with all personnel prior to loading.

Ensure that spill kits and firefighting equipment are readily available and accessible.

Conduct a brief drill or review of emergency scenarios related to fuel spills or fires.

Make sure that emergency contact numbers are posted and easily visible.

Verify that the loading compartment is sealed and secure after loading is complete.

Inspect for any spills or leaks in the loading area and address immediately.

Document the loading operation, including volume loaded and any incidents.

Ensure that all equipment is stored properly and that the area is cleaned up.

Schedule regular inspections and maintenance of loading equipment and safety systems.

Review and update safety procedures and checklists periodically to ensure compliance.

Conduct safety training sessions for all personnel involved in the loading process.

Gather feedback from personnel on safety practices and areas for improvement.